Modified Model L Gasfluxer® “Wicking System”

Model "L" Gasfluxer
ImageModel Type L Gasfluxer® Brazing EquipmentGasfluxer® Brazing Equipment - 3PTFE Coating aka "Stonecote®"

Modified Model L Gasfluxer® "Wicking System"

The Gasflux® Process utilizes equipment to dispense Liquid Gasflux® with the fuel gas. The Gasfluxer® consists of a mixing chamber and a reserve tank for flux storage. The unit can be easily added to any existing manual or automatic brazing installation and does not require special torches, tips or unusual connections.

The Gasflux Company manufactures a series of Gasfluxer® for specific manual torch operation or automatic brazing machinery. All Gasfluxers® have a valve adjustment to regulate the amount of Gasflux® introduced into the flame. The units listed below are our “base” Models and additional features can be added to suit one’s particular brazing application. Please consult with The Gasflux Company for any added features to the base Models.

 

Gasflux® is a registered tradename, and is to be used exclusively with Gasfluxer® dispensing equipment manufactured by The Gasflux Company.

 

Specifications

Fuel Gas Type

All fuel gases except acetylene

Manual/Automatic Brazing

Both

Number of Torches for Manual Brazing

2 to 8 Manual Torches
Automatic Brazing Application
Yes - Multiple gasfluxers may be required depending on the number of burners

Working Capacity

120 ft³/h

Maximum Fuel Gas Pressure

15 psig

Reserve Tank Capacity

5 gal

Fluxer Empty Weight

78 lb

Fluxer Height

33 in

Diameter

10 in

Thread Size

0.75 in

Connection Type

Female NPT

100% Bypass Capability

Yes

Industry Standards/Certifications

UL

Additional Information

A needle valve adjustment on the Gasfluxer® regulates precise control of the Gasflux®/Fuel mixture carried to the torch by directing all or only part of the fuel gas into the Gasfluxer® mixing chamber. Once the valve is set for the specific amount of flux needed, no further adjustments are required.

All Gasfluxers® can be easily maintained, regulated, and refilled by one operator.

The Gasflux® Process utilizes equipment to dispense Liquid Gasfluxer® with the fuel gas. The Gasfluxer® consists of a mixing chamber and a reserve tank for flux storage. The unit can be easily added to any existing manual or automatic brazing installation and does not require special torches, tips or unusual connections.

The Gasflux® Company manufactures a series of Gasfluxer® for specific manual torch operation or automatic brazing machinery. All Gasfluxers® have a valve adjustment to regulate the amount of Gasflux® introduced into the flame.
The “Modified” Model L Gasfluxer is essentially the same as the standard Model “L” Gasfluxer but uses cotton elements or “wicks” to absorb the liquid Gasflux. This allows for consistent delivery of flux vapor to the torch or burner regardless of the level of liquid Gasflux in the unit. The unit is used for both 1) automatic brazing machinery and 2) manual torch braze operation and can be directly piped into the fuel gas supply.

 

Image